Full Spectrum Laser HL40-5g Hobby Advanced Скачать руководство пользователя | Manualshive

Страница: 43 / 91

background image

42

a. In Fast XY (Mode 0) or Slow XY (Mode 1) the laser will move to the previously

saved job start position.

b. In Alignment (Mode 2) this button fires a shortduration pulse designed to

mark thermal paper.

5. RUN PERIMETER

a. In Fast XY (Mode 0) the bounding perimeter of the job will be shown quickly

(RetinaEngrave software must be started/loaded with a job for this function to
be active).

b. In Slow XY (Mode 1) the bounding perimeter of the job will be shown slowly.

6. START/CANCEL.

In any menu mode (File Select or Factory Reset) this button will select

the option displayed in the SELECTION field.

a. Cancels a move operation (homing, autofocus or a running job).
b. In Fast/Slow XY, with the laser UNLOCKED, this fires a higherpower test

pulse.

c. In Fast XY, pressing this button after the laser homes will rapidly move the

head to the upper left corner of the workspace.

d. In Slow XY, pressing this button after running a job will allow you to rerun the

same job.

710. JOG BUTTONS.

Four green arrow keys pointing UP (7), DOWN (9), LEFT (8), and

RIGHT (10).

a. In Fast or Slow XY (Modes 0 and 1), the buttons move the laser head left/right

and front/back.

b. In File Select (Mode 3) the up and down buttons scroll through the loaded

jobs.

PRO TIP! During a job only the LOCK/UNLOCK, CANCEL and UP/DOWN JOG buttons

function. All other function buttons are disabled.

LOCK/UNLOCK pauses/resumes the job.

CANCEL cancels the job.

UP/DOWN JOG BUTTONS allow you to adjust the job power on

the fly. Scale is from 0 (no power) to 255 (full power). We don't
recommend going over 180 with Hobby system lasers, due to that they
go over 180 the tube rated life will decrease.

MODES

FAST XY JOG (MODE 0) AND SLOW XY JOG (MODE 1).

Use the jog buttons to move the laser

head. Press the home button to index the laser head.

ALIGNMENT (MODE 2).

Use this mode during tube testing and mirror alignment. The test fire

button fires a shortduration laser pulse that will mark thermal paper. Use the jog buttons while the
motors are locked to jog the head. Unlock the motors to move the head by hand. The test fire

Technical Support is available from 8:00 am (PST) to 5:00 pm (PST) Monday through Friday at

[email protected]

.

«
...
41
42
43
44
45
...
»

Содержание HL40-5g Hobby Advanced




























































































Отзывы:

Нет отзывов

Похожие инструкции для HL40-5g Hobby Advanced

Бренд: WOLFF Страницы: 8

Бренд: Ducati Страницы: 52

Бренд: Mejix Страницы: 27

Бренд: Land Pride Страницы: 66

Бренд: Marshalltown Страницы: 48

Бренд: Craftsman Страницы: 26

Бренд: Craftsman Страницы: 26

Бренд: Craftsman Страницы: 23

Бренд: Craftsman Страницы: 18

Бренд: Craftsman Страницы: 37

Бренд: Craftsman Страницы: 47

Бренд: Craftsman Страницы: 52

Бренд: Ogura Страницы: 16

Бренд: Weidmüller Страницы: 186

Бренд: Logan Страницы: 6

SIMPLEX V-Groover 703

Бренд: Logan Graphic Products Страницы: 8

Бренд: Logan Graphic Products Страницы: 8

Бренд: Stiga Страницы: 589

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды