41
4.
Address Field.
Displays the last 3 digits of the IP address with a character prefix. A prefix
of A means that the laser did not find a DHCP server on its network and selfassigned an IP
address. The D prefix means the laser found a DHCP server.
BUTTON FUNCTIONS
Panel function buttons are numbered 1 through 6 starting from the left. Jog buttons (arrow pad)
continue the numbering from 7 starting at 12 o’clock and counting up counterclockwise. Typically
the icons on the top line are active during Fast XY Jog (Mode 0). The icons on the bottom are
typically active during Alignment (Mode 2).
1. FS/Z (MODE SELECT).
Toggles between modes:
a. Fast XY Jog (Mode 0)
b. Slow XY Jog (Mode 1)
c. Alignment (Mode 2)
d. Factory Reset (Mode 3)
2. LOCK/UNLOCK.
Locks or unlocks the drive motors. System cannot jog or test fire while
unlocked, but laser head can be positioned by hand.
a. Locked
b. Unlocked
3. HOME.
If in Fast XY (Mode 0) or Slow XY (Mode 1) pressing this button will cause the laser
head to seek the home position. After homing, the laser will know the position of the head.
Unlocking the motion system causes the unit to forget position (it must be rehomed).
4. RETURN/TEST FIRE.
Technical Support is available from 8:00 am (PST) to 5:00 pm (PST) Monday through Friday at
.
