Fujitsu FI-6000NS, Руководство оператора

Страница: 401 / 437

Network Scanner fi-6000NS Operator's Guide 373
C
Print (If Shrink to Fit is selected, the
scanned data is reduced to fit the print-
able area of the paper. If the scanned
data is smaller than the printable area,
it is printed at 100%.) No action required.
(If 100% is selected, the scanned data
is printed at 100%. If the scanned data
is larger than the printable area, only
part of it will be printed.) No action required.
Network is busy. Try again later. Wait for a while, and try again.
User name or password may be incor-
rect. Re-enter the user name and pass-
word.
Cannot find the network printer path. Contact a server administrator.
Not connected to the network. Check that the system network is
functioning normally by perform-
ing a ping test from
another machine in the network,
other than the server with network
printer. If the system network is
not operating correctly, refer to
"Failure to connect to a server
using its IP address" (page 305)
for
further solutions.
Scan&Buffer job is already queued on
the computer that owns the specified
network printer. Try the following:
•
Select a different network
printer.
•
Wait a short time, then try
again.
Access was refused. Access was refused. Contact a
server administrator to find out if
an access permit has been set.
Network path is too long. Try the following:
•
Set a shorter printer alias.
•
Contact a system administrator
to have the network path short-
ened.
Screen Message Action