Fujitsu Eternus DX200F, Руководство пользователя

Страница: 365 / 1082

Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
365
4.2.1 Add FC/FCoE Host Group
This function creates a new FC host group and registers which hosts are members of this group.
An FC host group uses FC or FCoE as the interface type, and groups the hosts (HBAs), which access the same
LUN group. The Host Affinity is specified for each FC host group.
The number of host groups and hosts that can be registered
*1: The total number of host groups irrespective of the interface types.
*2: The total number of hosts irrespective of the interface types.
Model Number of host
groups (*1) per
storage system
Number of hosts
(HBAs) (*2) per
storage system
Number of hosts
(HBAs)
per CA port
Number of hosts
(HBAs)
per host group
ETERNUS DX60 S3
512
128 32
8
ETERNUS DX100 S3
1024
256
ETERNUS DX200 S3
ETERNUS DX500 S3
ETERNUS DX600 S3
ETERNUS DX8700 S3
1536 8192 64
ETERNUS DX8900 S3
ETERNUS DX200F
512 1024 8
• Registration of the host is necessary to create a host group. Create a new host group when registering a
host with ETERNUS Web GUI by using this function.
• A host can be a member of several host groups. However, only one LUN group can be allocated to host
and port combinations when configuring host affinity.
• Refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-" for each OS type to assign
an appropriate host response to the created host group. A host response has a recommended patterns
which has been prepared for each OS type. Refer to
"Recommended patterns of host responses" (page
472) for details. If an appropriate host response is not configured to the host group, the path may not be
switched correctly or the volume may not be recognized correctly.
• The host response that is specified for a host group is applied to all the member hosts in the target group.
When a host belongs to multiple host groups, the same host response must be applied for all the groups
to which the target host belongs. When a host that already belongs to an existing host group is added to
a newly created host group, the host response of the new host group is applied to the host. The host
response of the existing host group to which the target host belongs is also changed. Refer to
"Example
of changing the host response when adding a host group" (page 370) for details.
• To change the settings of the host groups, use the procedure in "4.2.5 Modify Host Group" (page 385) .
• To add a port to an existing host group, use the procedure in "4.2.5 Modify Host Group" (page 385) .
• To change the host name or WWN, use the procedure in "4.2.15 Modify FC/FCoE Host" (page 423) .
• An FC host and an FCoE host can be members of the same host group. Both "FC host" and "FCoE host" are
abbreviated as "FC host" in this section.