manualshive.com logo in svg

Fujitsu Eternus DX200F, Руководство пользователя

Fujitsu Eternus DX200F - мощное устройство для хранения данных. На нашем сайте вы можете бесплатно загрузить пользовательское руководство для него. Получите детальную информацию о продукте, используя наше удобное руководство пользователя. Загрузить руководство вы можете на manualshive.com.

Поделиться
Скачать
background image

Chapter 3  Volume Management
  3.9  Start RAID Migration

ETERNUS Web GUI User’s Guide (Settings)

Copyright 2015 FUJITSU LIMITED

P2X0-1270-13ENZ0

305

*1:

When the migration source is a TPV or an FTV, the capacity indicates used capacity (the physical capacity that is
allocated from a TPP or an FTRP).

*2:

The maximum pool capacity is the maximum total capacity for TPPs and FTRPs that can be created in the ETER-
NUS DX. Refer to 

"6.2 Create Thin Provisioning Pool" (page 559)

 for details.

•

The encryption function cannot be used for the ETERNUS DX60 S3.

•

To change the data protection method (Default/T10-DIF) for the migration destination, perform the 
following procedure.

-

Stop host access in advance.

-

Reboot the server after the migration is complete.

•

Migration cannot be performed under the following conditions:

-

When the maximum number of volumes is already registered in the ETERNUS DX

-

When a RAID group diagnosis or a disk diagnosis is being performed in the ETERNUS DX

-

When the RAID group to which the migration source volume belongs is blocked or failed

-

When Advanced Copy is being performed by specifying the whole volume in the migration source 
volume and the settings for the volume capacity that is to be expanded are performed before and 
after migration

-

When the total number of migration, TPV balancing, and FTRP balancing (*1) processes that are 
running in the ETERNUS DX exceed 32

-

When the total capacity of the migration, TPV balancing, and FTRP balancing (*1) processes that are 
running in the ETERNUS DX exceeds 128TB

*1:

When the FTRP balancing is performed, the FTV balancing process starts in the FTSP. Refer to 

"6.11 Start

Balancing Flexible Tier Pool" (page 587)

 for details.

•

A volume cannot be expanded when the type of migration source volume is "TPV" or the type of migration 
destination is "TPP".

•

A volume cannot be expanded when the type of migration source volume is "FTV" or the type of migration 
destination is "FTRP".

•

Even if the volume type is "Standard", the maximum ODX Buffer volume capacity is 1TB.

•

A migration source volume and a migration destination volume that are undergoing migration cannot be 
deleted.

•

When performing migration for volumes for which "Cache Page Capacity" is changed using the procedure 
in 

"3.14 Modify Cache Parameters" (page 316)

, the "Cache Page Capacity" setting is reset to the initial 

value (unlimited).

•

When the destination volume capacity is expanded by migration, the expanded volume capacity must be 
recognized by the server after migration. Refer to the manuals of each OS or file system for information 
about server operation.

•

When "

 Attention" or "

 Warning" is displayed in the "Used Status" field for the migration destination 

TPP after migration, the used capacity of the relevant TPP is exceeding the threshold. In this case, expand 
TPP capacity by using the procedure in 

"6.5 Expand Thin Provisioning Pool" (page 571)

. Refer to "Thin 

Provisioning Pool (Basic Information)" in "ETERNUS Web GUI User’s Guide (Operation)" for TPP usage.

•

When "

 Attention" or "

 Warning" is displayed in the "Used Status" field for the migration destination 

FTRP after migration, the used capacity of the relevant FTRP is exceeding the threshold. Use ETERNUS SF 
Storage Cruiser to expand the capacity of the appropriate FTSP (for which expansion is determined to be 
necessary based upon the performance and usage). Refer to "Flexible Tier Pool (Basic Information)" in 
"ETERNUS Web GUI User’s Guide (Operation)" for FTRP usage.

Содержание Eternus DX200F



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Eternus DX200F

NEC M110 Setup Manual preview
M110
Бренд: NEC Страницы: 16
Panasonic SC-HC49 Service Manual preview
SC-HC49
Бренд: Panasonic Страницы: 4
Sharp CD-ES770 Service Manual preview
CD-ES770
Бренд: Sharp Страницы: 14
Sony CMT-DX400A Operating Instructions preview
CMT-DX400A
Бренд: Sony Страницы: 2
Sony CMT-DX400 Operating Instructions Manual preview
CMT-DX400
Бренд: Sony Страницы: 112
Sony MHC-GNX100, MHC-GNX90, MHC-GNX Operating Instructions Manual preview
MHC-GNX100, MHC-GNX90, MHC-GNX
Бренд: Sony Страницы: 20
Sony MHC-G100 Operating Instructions Manual preview
MHC-G100
Бренд: Sony Страницы: 17
Sony MHC-GR5 Operating Instructions Manual preview
MHC-GR5
Бренд: Sony Страницы: 28
Sony MHC-GRX2 Operating Instructions Manual preview
MHC-GRX2
Бренд: Sony Страницы: 32
Sony MHC-G101 Primary Operating Instructions Manual preview
MHC-G101 Primary
Бренд: Sony Страницы: 26
Sony MHC-G330 Operating Instructions Manual preview
MHC-G330
Бренд: Sony Страницы: 28
Sony MHC-GPX5 Operating Instructions Manual preview
MHC-GPX5
Бренд: Sony Страницы: 36
Sony MHC-GRX3 Operating Instructions Manual preview
MHC-GRX3
Бренд: Sony Страницы: 40
Sony MHC-g880 Operating Instructions Manual preview
MHC-g880
Бренд: Sony Страницы: 32
Sony MHC-GRX40AV Operating Instructions Manual preview
MHC-GRX40AV
Бренд: Sony Страницы: 44
Sony MHC-GR8000 Operating Instructions Manual preview
MHC-GR8000
Бренд: Sony Страницы: 44
Sony MHC-GRX30 Operating Instructions Manual preview
MHC-GRX30
Бренд: Sony Страницы: 48
Sony MHC-GR8 Operating Instructions Manual preview
MHC-GR8
Бренд: Sony Страницы: 48

Бренды по названию

Популярные бренды

Загрузить еще бренды