manualshive.com logo in svg

Fujitsu Eternus DX200F, Руководство пользователя, Страница: 803 / 1082

Поделиться
Скачать
Fujitsu Eternus DX200F Скачать руководство пользователя страница 803

Appendix A  Parameter List
  A.3  Volume Management

ETERNUS Web GUI User’s Guide (Settings)

Copyright 2015 FUJITSU LIMITED

P2X0-1270-13ENZ0

803

•

Start Optimizing TPV/FTV Capacity after migration

•

Data Integrity

●

Select Migration Destination

•

Select Migration Destination

Description

Select "Enable" or "Disable" for the capacity optimization of source volumes after 
migration is complete.

When Start Optimizing TPV/FTV Capacity after migration is enabled, the destination 
volume will be reserved for capacity optimization.
"Capacity optimization" is a function that releases the physical area when data in the 
block (*1) that is allocated to a TPV or an FTV is filled with zeros.
This setting is enabled only when the migration destination is "Thin Provisioning Pool" or 
"Flexible Tier Pool".
*1:

Volume allocation unit

Input condition/
Display contents

•

Enable

•

Disable

•

Do not select "Enable" if the migration source is a NAS user volume, a NAS backup volume, or a NAS system 
volume.

•

When "Thick" is selected for "Allocation", "Enable" cannot be selected.

Description

Select the data protection method of the volume after migration. 

When this function starts, the data protection method of the migration source volume is 
displayed.
This item is available when "RAID Group / Thin Provisioning Pool / Flexible Tier Pool" is 
specified for "Migration Destination" and "RAID Group" is selected for "Select Migration 
Destination". If this item is disabled, "Default" is set for the ETERNUS DX.

Input condition/
Display contents

•

Default
Data is protected within the ETERNUS DX.

•

T10-DIF
Data is protected with a T10-DIF (Data Integrity Field) compatible method in the 
ETERNUS DX and the host paths. This method is available only when the host 
interface is FC.

•

When "T10-DIF" is selected for "Data Integrity", a migration to WSV, TPV, or FTV cannot be performed.

•

"T10-DIF" is supported in Oracle Linux 6 and later.

Description

Specify the destination RAID group, the TPP, or the FTRP.

The selectable RAID groups, TPPs, or FTRPs for the migration destination are displayed. 
The RAID groups, TPPs, or FTRPs that are displayed depend on the volume capacity and 
encryption status.

Input condition/
Display contents

The RAID groups, the TPPs, or the FTRPs that are available as the migration destination

Содержание Eternus DX200F



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов