Chapter 4 Connectivity Management
4.3 CA Port Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0
444
The main setting items are as follows.
●
Port Settings
•
Port
•
Connection
•
Set Loop ID
•
Loop ID
•
Transfer Rate
•
WWN (Port Name)
•
WWN (Node Name)
3
Click the [Modify] button.
A confirmation screen appears.
4
Click the [OK] button.
Modification of the FC port parameters starts.
5
Click the [Done] button to return to the [FC Port] screen.
End of procedure
■
Copying FC Port Parameters
The procedure to copy FC port parameters is as follows:
Procedure
1
Select which FC ports to set the parameters for (multiple selections must be made) and click
[Configure FC Port] in [Action].
If some parameters do not satisfy the input conditions, an error screen appears. If this occurs, check
the parameter settings.
If the Loop ID is changed while a server is operating, reboot the server immediately. If the server is
operated without being rebooted, a warning message may appear or a system failure may occur.
Multiple selections can be made from FC ports that have the same "Type" and "Port Mode".
Содержание Eternus DX200F
Страница 2: ...This page is intentionally left blank ...
Страница 1082: ......