background image

Chapter 2  Component Management
  2.2  Release Global Hot Spare

ETERNUS Web GUI User’s Guide (Settings)

Copyright 2015 FUJITSU LIMITED

P2X0-1270-13ENZ0

229

2.2

Release Global Hot Spare

This function releases a drive from being a Global Hot Spare. 
A drive that is released from being a Global Hot Spare can be used as a data drive or Dedicated Hot Spare for a
different RAID group.

The procedure to release a Global Hot Spare is as follows:

Procedure

1

Select a drive (multiple selections can be made) that is to be released from being a Global 
Hot Spare and click [Release Global HS] in [Action]. 

A confirmation screen appears. 

2

Click the [OK] button. 

Releasing of the Global Hot Spare starts.

3

Click the [Done] button to return to the [Drives] screen. 

End of procedure

This function cannot be used when the drive is already used as a hot spare.

Содержание Eternus DX200F



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы: