Fuji Xerox ApeosPort 350 I, Руководство пользователя

Страница: 69 / 609

Scan Options
67
Copy
3
1
Select [Original Size].
2
Select the size of the document.
If you select a non-standard size,
specify values for the X and Y
directions.
„ Auto Size Detect
Scan sizes are detected automatically.
Note • If the document size cannot be detected automatically, a screen to input the document size
appears.
„ Standard Size
Select a document size from a list of 11 pre-configured types.
You can change the indicated document sizes. For more information on the setting procedures, refer to
"Original Size Defaults" (P.294).
„ Free
Enter the desired scan size when scanning non-standard size documents or when
making copies at a size different from that of the currently loaded document. Set the
size in the document glass X (width) direction within the range 15 to 432 mm and in the
Y (height) direction within the range 15 to 297 mm in 1 mm increments. The scale on
the outside of the document glass is a useful reference for specifying the document
size.
Important • When the document is loaded on the document feeder, the base point in the Y (height)
direction is the center of the edge. If you specify 100 mm for the desired scan size, the scan
size becomes from 50 mm above to 50 mm below the center of the document.
Mixed Size Originals
(Scanning Different Size Documents Simultaneously)
When using the document feeder, you can simultaneously scan different size
documents and make copies onto paper that matches the respective sizes of the
documents. You can also specify the size of the paper to make copies on so that copies
are made on the same size of paper.
Important • Confirm that the orientation of the first sheet of the document and the [Original Orientation]
setting of the [Scan Options] screen are the same.
• Be sure to load A5 documents vertically.
• When loading a B5 size document with A3 or A4 size documents in a vertical direction, place
the B5 document also in a vertical direction.
• Recommended document size combinations are the followings. If the combination of the
document sizes is not our recommendation, the documents may not be copied properly due
to slant feeding.
- A4(portrait) and A3 (landscape)
- B5(portrait) and B4 (landscape)
- 8.5" x 11" (portrait) and 11" x 17" (landscape)
- 8.5" x 11" (portrait) and 8.5" x 13" (landscape) or 8.5" x 14" (landscape)
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• [Original Orientation] is set in reference to the direction set for the first page of the document.
Load the rest of the document from the second page onwards in the same direction as that
of the first page of the document.