Fuji Xerox ApeosPort 350 I, Руководство пользователя

Страница: 325 / 609

Fax Mode Settings
323
Syste
m
Settings
11
Incoming iFax Print Options
When an e-mail is received from an iFax supporting machine addressed to the e-mail
address of the machine, you can select the print operation.
„ Attachment
Only prints the attached documents.
„ Full Headers and Contents
Prints the e-mail headers and body of the e-mail.
„ Basic Headers and Contents
Prints part of e-mail headers (From/To/Subject/Date) and the e-mail body.
„ Auto Print
Prints the e-mail headers and body of the e-mail if the e-mail body is not empty.
Incoming iFax Output Destination
Set the output destination for printed iFax received documents.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• Only when an Exit 2 Tray is installed in a machine without a finisher (optional), [Center Tray
- Upper] can be selected. In this case, [Center Output Tray] is indicated as [Center Tray -
Lower].
Fax Transfer from Address Book
Set whether to set restrictions when forwarding e-mail received in SMTP format by iFax
to fax addresses not in the address book.
„ Off
Forwarding is not restricted.
„ On
Check if the forwarding fax number is listed in the address book, and if not, refuse the
received e-mail and destroy the data.
Fax Transfer - Add Sender Header
When forwarding received e-mail from iFax to fax, select whether to add a send header
(start time, sender name, recipient name, G3 ID, and number of pages).
Fax Transfer Maximum Data Size
When sending a received e-mail from iFax to a fax, set the maximum data size.
1
Select [Fax Transfer Maximum
Data Size].
2
Select [Off] or [On].
3
If you selected [On], select [ ],
[ ], or the numeric keypad to
enter a numeric quantity.
4
Select [Save].