FOTEK GD20-004G-2, Руководство по эксплуатации

Страница: 38 / 171

Goodrive20 Series VFD Function parameter list
-33-
Function
code
Name Description Default Modify
multi-function terminals HDI. Set P05.00
(HDI input selection) to high speed pulse
input.
5: Simple PLC program setting
The VFD runs at simple PLC program mode
when
P00.06 =5 or P00.07 =5. Set P10
(simple PLC and multi-step speed control) to
select the running frequency running
direction, ACC/DEC time and the keeping
time of corresponding step. See the function
description of
P10 for detailed information.
6: Multi-step speed running setting
The VFD runs at multi-step speed mode
when
P00.06 =6 or P00.07 =6. Set P05 to
select the current running step, and set P10
to select the current running frequency.
The multi-step speed has the priority when
P00.06 or P00.07 does not equal to 6, but
the setting step can only be the 1
–15 step.
The setting step is 1
–15 if
P00.06 or P00.07
equals to 6.
7: PID control setting
The running mode of the VFD is process PID
control when
P00.06 =7 or P00.07 =7. It is
necessary to set P09 . The running frequency
of the VFD is the value after PID effect. See
P09 for the detailed information of the preset
source, preset value and feedback source of
PID.
8: Modbus communication setting
The
frequency is set by Modbus
communication. See P14 for detailed
information.
9
–11: Reserved
P00.08
B frequency
command
reference
selection
0: Maximum output frequency, 100% of B
frequency setting corresponds to the
maximum output frequency
1: A frequency command, 100% of B
frequency setting corresponds to the
0
○