FOTEK GD20-004G-2, Руководство по эксплуатации

Страница: 36 / 171

Goodrive20 Series VFD Function parameter list
-31-
Function
code
Name Description Default Modify
STOP/RST on the keypad. Set the
multi-function key QUICK/JOG to
FWD/REVC shifting function ( P07.02 =3) to
change the running direction; press RUN
and STOP/RST simultaneously in running
state to make the VFD coast to stop.
1: Terminal ("LOCAL/REMOT" flickering)
Carry out the running command control by
the forward rotation, reverse rotation and
forward jogging and reverse jogging of the
multi-function terminals
2: Communication ("LOCAL/REMOT" on);
The running command is controlled by the
upper monitor via communication
P00.03
Max. output
frequency
The parameter is used to set the max. output
frequency of the VFD. It is the basis of
frequency setup and the acceleration/
deceleration.
Setting range: P00.04
–400.00Hz
50.00Hz
◎
P00.04
Upper limit
of the
running
frequency
The upper limit of the running frequency is
the upper limit of the output frequency of the
VFD which is lower than or equal to the
maximum frequency.
Setting range: P00.05
–
P00.03 (max output
frequency)
50.00Hz
◎
P00.05
Lower limit
of the
running
frequency
The lower limit of the running frequency is
that of the output frequency of the VFD.
The VFD runs at the lower limit frequency if
the set frequency is lower than the lower
limit.
Note:
Max. output frequency ≥ Upper limit
frequency ≥ Lower limit frequency
Setting range: 0.00Hz
–
P00.04 (Upper limit of
the running frequency)
0.00Hz
◎
P00.06
A frequency
command
selection
Note: A frequency and B frequency cannot
set as the same frequency given method.
The frequency source can be set by P00.09 .
0
○