Forpost Arena GALAXY Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 67

Forpost Arena GALAXY Скачать руководство пользователя страница 9

9

There are 4 LAN ports on the connection panel, a WAN port for connecting the

provider's cable and a slot for connecting the power supply.

The device is delivered completely set up for operation with the software and the
equipment for laser tag produced by the Lasertag.net company.

Network setup is described in the chapter 8 of this manual.

5.

Domination Box Smart

The Smart Domination Box (DBs) – an additional device that allows you to implement

one of the most interesting scenarios in the indoor laser tag - "Capture a domination box".
The main difference is the presence of 3 indicator scale, that shows the capture degree of

each command, as well as 5 modes, which allow to record the capture for both - time and
shots.

Capture is made by an infrared ray pulse directed from the laser tag gun into the

sensor. The sensor is placed in the lower inner part of the device, so the emitter must be
placed vertically downward relative to the base plane of the Domination box.

The device is powered by Li-ion batteries (7.4 V, total capacity 5200 mAh) located in the

case. The batteries are charged from the mains with a standard charger with an output

voltage of 8.4 V and a maximum charge current of 2 A.

LAN ports

WAN port

4х LAN ports

Power supply slot

«
...
7
8
9
10
11
...
»

Содержание GALAXY




































































Отзывы:

Нет отзывов