30
To edit the kit settings, click on the button to the right of the setup type selection
buttons. Then select and click on the type of setting (general, by teams or individually for
each ID).
It is possible to modify next parameters:
Power of blaster IR beam is set out depending on a premise and obstacles, which
are reflected in shooting and ricochet burst distance (1-100%).
The volume of sound effects playing by the blaster speaker - moving the slider you
can set the desired level from 0 to 100%.
Amount of health – health units (1-999).
Period of player survivability after it has been hit (1-25,4 с).
Duration of shock – standby unattended time of player's blaster after it has been
hit (1-25,4 с).
Time until auto-respawn after a player’s defeat (1-254 s), 0 - off.
Unlimited cartridge clips (yes/no)
The number of clips if the “Endless clips” option is disabled (1-254 pcs).
Amount of cartridges in a holder (1-254 pcs).
The ability to switch the shooting mode on the blaster (single, burst or endlessly)
by holding down the reload button for 10 seconds (yes/no).
Rate of fire (1-999 rounds per minute).
The number of shots in a round when holding the trigger (1-254).
Reload time (1-25,4 с).
Damage dealt per shot (1-100 units).
Auto-loader (yes/no).
Capacitive hand sensor (yes/no).
Next, the program sets up the affected area (so-called differential damage). You can set
the following values:
Chest (0-300)
Back (0-300)
Weapons (0-300)
Weapon damage, sec. (0-254), 0 - the parameter is turned off.
In addition, the following parameters are also displayed in the window:
Round time on the OLED-display (yes/no).
Player's position on the OLED display (yes/no).
