40
10.2.
Game control
After choosing a scenario, setting up game sets and additional devices, as well as
forming teams, you can proceed directly to the game.
The window "Game Control" opens after clicking on the icon
.
"Game Control" program Mode
In the upper part of the window there is a radio button with which the accumulation of
statistics at the end of the round is turned on. This is necessary if the game consists of several
rounds and the teams are interested in the general statistics for the game.
There is an opportunity in program, to delay the automatic start. To do this, you need to
select a numerical value (from 5 seconds to 3 minutes) from the drop-down list "Delay the
start of the game".
In the center of the window "Game Control" there is the timer of the game round. After
starting the game with the button and the end of the delay time (if it was set),
the game kits play the “Go-go-go!!!” sound command and the timer starts the countdown of
the game round.
If necessary, you can quickly adjust the time: by clicking on the buttons and add
or subtract by the minute relative to the time set in the settings (if the program is loaded
with operator rights, this feature is not available).
The button pauses the game, and the button stops it.
The Gaming device status bar (right) informs about participation in the game and the
mode of game kits and additional devices in the corresponding tabs (“Tagers”, “DBs”,
“SIRIUS”, “Multistation”). An image of the game joystick appears in the cell of the game
kit If the kit is removed during the game round, the icon will be discolored: . When
paused, the kit icon looks like this: .
Reduce round
duration
Game
timer
Pause
Increase round
duration
Start
Current
scenario
Game Log
Round Delay
Countdown Timer
Game stop
