23
Subnet Mask - 255.255.255.0;
Start IP Address (initial IP address range of the server)-192.168.0.102;
End IP Address
(the end range of the IP-address of the server) -
192.168.0.204;
Click the “Apply” button to apply the entered settings.
In the Wireless menu, go to the Basic Setting item and install:
SSID (hotspot name) – LASERTAG
1
;
Encryption - WPA2-PSK;
Encryp Type - AES;
Key (password to the hotspot) - 2015LT2015;
Apply the selected settings using the “Apply” button.
After this, you should configure the local network (by the example of Windows 10).
8.2.
Local network setup
1.
Through any of the 4 LAN connectors, connect the router to the network card of
the computer using the UTP cable, which is included in the package.
2.
Install the antennas in an upright position.
3.
Turn on the router.
1
The equipment produced by the company allows up to 5 different hotspots, each with its own password.
Information on setting up can be obtained by contacting technical support.
