12
"Triple capture" Mode.
2 to 3 teams are participating. Time capture.
It differs in that the indication of the degree of capture of the Domination Box is made
in real time for each of the teams in different indicator stands.
After the first hit, the timer of the capturing team is turned on, and the lower LED of
one of the indicator racks starts to flash smoothly with the color of this team. As the timer
works, the LEDs will light up from bottom up, each of which will correspond to 1/16 of the set
hold time. After a player hits another team, they start to light up and flash the LEDs of the
second indicator rack from bottom to top. The timer of the previous team stops and does not
reset, but resumes its work after this team again captures the Domination Box. The LEDs of
this rack stop flashing and remain lit at the
achieved level. It similarly occurs after hitting the
third team. The DB does not respond to the fourth team.
After all the LEDs of one of the indicator racks light up, the Domination Box plays an
audio signal and starts flashing with the color of the winning team.
You can use this mode for two teams as well, but you need to set the Domination Box
so that the racks of both participating teams are visible, for example, near a wall.
"Flag Raising" Mode.
Two teams are participating. Capture by shots.
It differs in that the capture is carried out by shots, and the indication of the degree of
capture is carried out simultaneously on all indicator racks on the basis of the “flag raising”
principle.
After the first shot, the lower LEDs of all three racks are lit with the color of the player’s
team. When the number of shots is equal to 1/16 of the set capture parameter, the LEDs light
up sequentially. If the second team makes a “re-capture”, then first the LEDs of the color of
the previous team will go out sequentially (the flag of the first team “drops”), and then they
will light up with the color of the newly captured team (the flag of the second team is
“raised”).
Also, as in the "Capture by shots" mode, during the game the IR-emitters of the device
by default issue the "Radiation" command, and players who are in the zone of influence of
the emitters will be taken health units.
The winner is the team that first "raises" the flag / LED strip of its color. The Domination
Box plays an audible signal and flashes the color of the winning team.
Service Mode
The Domination Box control board is equipped with a Wi-Fi module. Thanks to this, it is
possible to flash the microcontroller of the device “by air”. The need for it arises when
updating the firmware (it is planned to increase the number of Box modes to at least 10), as
well as to restore the current one.
To perform this procedure, you need a Wi-Fi router and BootLoader program,
developed by the company.
The transition to the service mode is carried out by turning on the device with the
service button held down.
The transition to this mode will be indicated by a blinking power indicator above the
power button.
The procedure for flashing the microcontroller of the Domination Box is given in
chapter 11.2.