21
If this parameter is turned off, then after the time set in the “Inactivity period” setting
(Scenario editor/Optional equipment/MS settings/Settings/Base) the database will self-
recover.
The “Base” mode can be used in any scenario with a limited number of health units and
ammunition.
The device is controlled from the ARENA computer program via a Wi-Fi channel. The
Multistation setup is described in chapter 10.1.1. of this manual.
The firmware of the microcontroller is updated using the BootLoader program (chapter
11.4.).
8.
Equipment Configuration
It is better to begin configuration of the equipment for indoor laser tag, manufactured
be the company, with the connection a router to the server.
The router comes fully configured
and does not require additional settings.
If, for some
reason, the device settings are reset (for example, you pressed the Reset button by a mistake
or made changes to the settings that led to the incorrect router work), you should configure
it yourself (on the example of the firmware of the Totolink router).
8.1.
Manual router configuration in case of accidental reset
1.
Check and, if necessary, set the computer to automatically obtain an IP-address.
2.
For automatic configuration, obtain the configuration file of the
totolink_config.dat router from the technical support of the company and save
it in any directory on the file system of your PC.
3.
Through any of the 4 LAN connectors, connect the router to the network card of
the computer using the UTP cable, which is included in the package.
4.
Turn on the router.
In any browser (Opera, Google Chrome, Internet Explorer) installed on the
computer, enter 192.168.1.1 in the URL input line.
If 192.168.1.1 does not open, you should reset the router to the default settings -
on the front panel of the router, press the RST-WPS button for 15 seconds, and
then release it. Repeat opening the router settings page.
5.
On the back of the router, read the password from the sticker set by the
company's QC, for example:
6.
In the window that appears, enter User Name: admin, Password: from the
sticker.
7.
In the Easy Setup window, select the Advanced Setup mode.
