TRANSLATION OF THE ORIGINAL INSTRUCTIONS (Keep for future reference)
Codice Documento
Rev.
Data di salvataggio
Data di stampa
U500 - U600 ISTRUZIONI
02
04/11/2015
04/11/2015
EN
60
5.6. ROUTINE
MAINTENANCE
Personnel responsible for carrying out the operations described in this chapter must have read, understood and consequently observe
all the safety prescriptions, in particular:
1. waiting for the stopping times, before inserting limbs or parts of the body into the machine danger areas,
2. the adequate use of personal protective devices and safety accessories needed to perform cleaning operations inside the machine’s
danger areas,
%"?'%<%"!#&\"##<%!&%>&!@&"#%[
4. before performing any maintenance, cleaning and replacement of parts, the machine must be isolated from all energy supplies.
Furthermore, all general rules must be observed to keep the machine in perfect working order:
1. keep the machine clean and tidy,
2. avoid all damage,
3. avoid a situation wherein make-shift or urgent repairs become commonplace,
4. do not perform work on the machine which produces swarf; for example, should it be necessary to drill holes, carefully check that no
residues end up in machine parts,
5. for disposal of worn or replaced materials, observe the relative legislation in force.
Place the switch on OFF / 0 and pull the power cable plug out of
the socket.
Turn the knob to discharge residue pressure from the pneumatic
system and disconnect the compressed air line.
5.5.
ISOLATION FROM EXTERNAL ENERGY SOURCES
During maintenance, cleaning and replacement of parts, the machine must not be used and no commands must be transmitted.
Before performing any maintenance, lubrication, cleaning and replacement of parts etc. external energy supplies must be disconnected.
All disconnecting devices must be padlocked in the “0” (OFF) position.
