TRANSLATION OF THE ORIGINAL INSTRUCTIONS (Keep for future reference)
Codice Documento
Rev.
Data di salvataggio
Data di stampa
U500-U600 ISTRUZIONI
02
04/11/2015
04/11/2015
EN
41
Filling the magazine in the U600 model
In the U600 model, multiple magazine loading is performed by
automatic positioning of the magazine.
Each magazine has a V-nail detection sensor and a “No V-Nails”
alarm.
Insert the V-Nails as follows:
1. Lift the protection panel (A); the magazine automatically goes
to the V-nail loading position. Opening of all the V-nail pusher
cylinders is commanded (magazine open).
2. Check that the height of the V-nails matches the slot in the
magazine. V-nail height is indicated on each magazine slot (B).
3. Put the V-nails in the magazine (C), making sure the sharp part
(glue-edge side) is facing upwards and the top of the stick is
pointing towards the pusher.
4. Close the protective panel to close all the V-nail pusher cylinders
(magazine closed).
!($;%!$'!)#%+(%%;$~<
%? $&#'* !##`& &*\ "'* %?
machine has been mechanically designed for that purpose.
It allows the user to customize the entire magazine assigning a
V-Nail height to each of the 5 channels to meet any given preference.
By interchanging the special adapters as required (D), it is possible,
for example, to have a magazine with all 5 channels set to take the
same height of V-nails or other combinations of heights.
The standard supply arranges the magazine with 5 channels of
different height.
&#%&%?!##`&&*\"'*%?"#%&
enabled by the machine setup.
NOTES
- ( !$!,
B
C
D
A
