TRANSLATION OF THE ORIGINAL INSTRUCTIONS (Keep for future reference)
Codice Documento
Rev.
Data di salvataggio
Data di stampa
U500-U600 ISTRUZIONI
02
04/11/2015
04/11/2015
EN
47
Installation of interchangeable stoppers
The interchangeable stoppers (A), based on work requirements,
may be applied to:
- Single stopper holder
- Double stopper holder
- Magnetic stopper holder
Installe the stopper (A) for the required hardness in the stopper
holder, positioning it under the slot and manually pressing it in place.
To remove the stopper (A) simply pull it out with your hand by gently
taking hold of one of the two sides.
Adjusting the tilt of the workbench
Depending on the operator’s needs, the workbench can be tilted.
$#\%#<%!&%["$<#**>+
1. Loosen the handle underneath the working bench (B).
2. Slowly tilt the working bench to the required position (C).
3. Re-tighten the handle once the required position has been
achieved.
A
A
A
C
B
