manualshive.com logo in svg

FLETCHER Alfamacchine U500, Инструкция по эксплуатации

Поделиться
Скачать
FLETCHER Alfamacchine U500 Скачать руководство пользователя страница 63

TRANSLATION OF THE ORIGINAL INSTRUCTIONS (Keep for future reference)

Codice Documento 

Rev. 

Data di salvataggio 

Data di stampa

U500-U600 ISTRUZIONI 

02 

04/11/2015 

04/11/2015

EN

59

5.3. MAINTENANCE 

PRESCRIPTIONS

 DANGER - WARNING

 

ALL THE MAINTENANCE, CLEANING AND PARTS REPLACEMENT MUST BE CARRIED OUT SOLELY AND EXCLUSIVELY 
WITH THE MACHINE DISCONNECTED FROM ALL POWER SUPPLIES.

It is prohibited to perform any maintenance work on parts that are in motion.

5.4. GENERAL 

WARNINGS

 DANGER - WARNING

 

BEFORE PERFORMING ANY MAINTENANCE, CLEANING, REPLACEMENT OF PARTS AND TROUBLESHOOTING PAY THE 
UTMOST ATTENTION TO THE DECALS AFFIXED TO THE MACHINE AND TO THE ELECTRICAL EQUIPMENT.

 

DURING ALL ACTIVITIES DO NOT TAMPER WITH OR DEACTIVATE ANY OF THE SAFETY DEVICES FOR ANY REASON, 
EITHER TO CREATE BYPASSES OR TO USE THEM FOR PURPOSES OTHER THAN THEIR INTENDED USE AS PRESCRIBED 
BY THE MANUFACTURER.

After performing any of the above tasks on the machine, reset and reactivate all the safety devices.
Do not tamper with or deliberately damage the protective screens nor remove or conceal the warning notices. In the event of deterioration 
or illegibility of the safety decals immediately order replacements from the electrical equipment supplier.

 DANGER - WARNING

 

BEFORE PROCEEDING WITH MAINTENANCE, CLEANING AND/OR THE REPLACEMENT OF PARTS, ALWAYS PUT UP A SIGN 
WHICH IS CLEARLY VISIBLE INDICATING THAT MAINTENANCE OPERATIONS ARE UNDERWAY AND THAT THE MACHINE 
CAN ONLY BE RESTARTED AFTER HAVING DULY ASCERTAINED THAT ALL OPERATIONS HAVE BEEN COMPLETED AND 
ALL SAFETY GUARDS HAVE BEEN REPLACED.

 

BEFORE PERFORMING ANY MAINTENANCE, CLEANING, REPLACEMENT OF PARTS AND TROUBLESHOOTING PAY THE 
UTMOST ATTENTION TO THE DECALS AFFIXED TO THE MACHINE AND TO THE ELECTRICAL EQUIPMENT.

After performing any of the above tasks on the machine, reset and reactivate all the safety devices.
Do not tamper with or deliberately damage the protective screens nor remove or conceal the warning notices. In the event of deterioration 
or illegibility of the safety decals immediately order replacements from the electrical equipment supplier.

Содержание Alfamacchine U500



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды