TRANSLATION OF THE ORIGINAL INSTRUCTIONS (Keep for future reference)
Codice Documento
Rev.
Data di salvataggio
Data di stampa
U500 - U600 ISTRUZIONI
02
04/11/2015
04/11/2015
EN
42
Replace the magazines as follows:
1. Lift the protection panel (A); the magazine automatically goes
to the V-nail loading position. Opening of all the V-nail pusher
cylinders is commanded (magazine open).
2. Pinpoint the channel you wish to assign a different V-nail height
to and position it by touching the corresponding channel on the
screen “B”.
3. Remove the 3 socket head or Torx type screws (C) and remove
the adapter (F) from the magazine.
4. Choose one of the marked adapters (F) depending on the V-Nail
height required (5-7-10-12) and insert it in the magazine (D).
Secure in place with the special screws (C).
5. Repeat the previous operations to modify the other V-nail
magazines as required.
6. Once the mechanical operations to customize the magazine
have been completed, access the display page (E) to program
%?&>!##`&$&#%&
$?%?%$%?!<<$?#&&*#%*#%$&<
to call up the menu for selecting the V-nail type (G).
8. Select the V-nail type (colour) for which the magazine channel
?#'&$&<
&$$&#%&%?!##`&?#'&$!"*%<[%?
display screen (E) graphically shows the new arrangement of
the magazine, e.g. magazine H7 replaced by another H10 one).
10. Proceed to load with V-nails by following the instructions
provided in the heading “Filling the magazine in the U600 model”.
11. Once the magazine has been filled, the display page (E)
indicates the presence of the replaced magazine. The example
&%??>%?"&$%>|!##`&
B
C
E
D
F
G
A
