manualshive.com logo in svg

FLETCHER Alfamacchine U500, Инструкция по эксплуатации

Поделиться
Скачать
FLETCHER Alfamacchine U500 Скачать руководство пользователя страница 6

TRANSLATION OF THE ORIGINAL INSTRUCTIONS (Keep for future reference)

Codice Documento 

Rev. 

Data di salvataggio 

Data di stampa

U500 - U600 ISTRUZIONI 

02 

04/11/2015 

04/11/2015

EN

2

 DANGER - WARNING

 

BEFORE USING THE MACHINE PLEASE READ THIS MANUAL CAREFULLY SO THAT YOU BECOME FAMILIAR WITH THE 
MACHINE, ITS ENVISAGED USE AND ANY RISKS ASSOCIATED WITH IT.

Keep the Use and Maintenance Manual in good condition: Remember, it is an integral part of the machine. Always refer to the manual 
to get best machine performance in maximum safety while performing the operations described therein.
This manual must be kept in an easily accessible place, near the machine, at all times so that it can be consulted whenever necessary.

 DANGER - WARNING

 

USE THE MACHINE SOLELY AND EXCLUSIVELY FOR THE USES INDICATED AND IN ACCORDANCE WITH THE 
RECOMMENDATIONS PROVIDED IN THIS MANUAL. NEVER TAMPER WITH IT, FORCE IT OR USE IT IN ANY INAPPROPRIATE 
MANNER.

1. 

INTRODUCTION TO USE

1.1. 

HOW TO CONSULT THIS MANUAL AND THE SYMBOLS ADOPTED

Please pay particular attention to the words “DANGER – WARNING”, “DANGER – CAUTION” and “NOTES” as used in this manual.
To draw the user’s attention to certain information and provide warning messages, the operations described in this manual are accompanied 
by symbols and notes to highlight the presence of any hazards and indicate the safe use of the equipment. These symbols and notes 
belong to various categories as indicated below: 

 DANGER – WARNING: IMPORTANT INFORMATION CONCERNING GENERAL SAFETY.

 DANGER-CAUTION: highlights situations where careful and sensible actions are essential.

 NOTES: information of a technical nature.

 

    

 

  Safety warning on machine use

 

 

Part of the equipment remains live even 
when the door is open and with the electrical 
power switch turned on.

  

 

To turn off the power supply act on the upline 
cut-off device on the power supply.

  

EC 

dataplate

230V  -  50-60Hz

 Etichetta 

Descrizione

  

Wear protective googles.

  

Wear protective gloves.

  

Wear safety footwear

   

Wear ear defenders.

 

 !"#$%##&%'%#$*+#;<&

the corners of the guards.

Содержание Alfamacchine U500



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды