flamco MeiTronic W10, Руководство пользователя

Страница: 42 / 232

42 Service setting manual
EN
SERVICE PARAMETERS
Service parameters are divided into the following groups:
S1 - general settings, S2 - settings for the first heating circuit, S3 - settings for the sec-
ond heating circuit, S4 - settings for domestic hot water, S5 - settings for boilers in
S6 and S7 - settings for alternative energy sources and S8 – general settings.
Service parameters enable you to choose among various additional functions and
adaptations of controller's operations. When you select the desired parameter group,
a new screen appears:
SCHÉMA HYDRAULIQUE
HYDRAULIC SCHEME
Parameter
mark
Factory set
value of the
parameter
Parameter value
MIN is the minimum possible
setting of parameter
MAX is the maximum possible
setting of parameter
Parameter description
- Parameter is locked.
You can change the setting by pressing the button. Parameters are locked by
factory setting, so a new screen appears for the entry of unlocking code:
Use buttons and to find the number you
wish to change and press the button.
When the number begins to flash, you can change
it with buttons and and confirm it by
pressing the button. When the correct code is
entered, the controller will unlock the parameters and
return to the menu with the selected group of param-
eters. Exit the unlocking code entry by
pressing the button.
Only a trained professional shall perform the changing of service and
function parameters.
You can change the parameter value with buttons and .
Confirm the selection by pressing the button. Now you can move on to another
parameter with buttons and , and repeat the procedure.
Exit parameter settings by pressing the button.
Change of setting is only valid when confirmed with the button.