flamco MeiTronic W10, Руководство пользователя

Страница: 66 / 232

66 Service setting manual
EN
FACTORY SETTINGS
The menu contains the tools to help you set the controller.
The controller can be reset to desired settings by selecting:
RESET OF CONTROLLER PARAMETERS
Resets all parameter settings P1, P2, P3, P4, P5, P6, S1 (except S1.1), S2, S3,
S4, S5, S6, S7, S8 and F to factory set values.
RESET OF TIME PROGRAMS
Deletes the set time programs and retrieves factory set time programs.
LOAD USER SETTINGS
Uploads all controller settings from the safety copy. If a safety copy doesn’t
exist, this command cannot be realised.
SAVE USER SETTINGS
Saves all controller settings as a safety copy.
RESET OF CONTROLLER AND RE-START OF THE FIRST SETTING
Retrieves all parameters to factory set values and restarts the controller in
the first set up.
Before performing the commands stated above, the
controller requires a confirmation of the selected
command.