Document #15140 Rev.G 01/02/02 P/N 15140:G
39
Programming Options
Primary Central Station Number Account Code (17-20)
A unique account code is provided by the Central Station. Four locations at addresses 17-20 (factory default settings
of all '0s') are used to enter the account code. Valid entries are 0 to 9 and A to F. The number of digits entered must
match the format selection. If programming '2, 3, 4 or 5' into address 16, enter the three digit account code supplied
by the Central Station (location 20 is ignored). If programming '0, 1, 6, 7, 8, 9, A, B, C or D' into address 16, enter
the four digit account code supplied by the Central Station.
Primary Central Station Number 24 Hour Test Time (21-24)
Use military time when entering the 24 hour 'test' time. The 24 hour test report to phone number 1 takes up four loca-
tions, from addresses 21-24. The default is '2345' (11:45 PM). The limits for each address location are as follows:
21 - enter 0-2
22 - enter 0-9
23 - enter 0-5
24 - enter 0-9
Do not use 'A-F'
Primary Central Station Number 24/12/8/6 Hour Test Time Interval (25)
The test report sent to the Primary phone number may be sent every 6, 8, 12 or 24 hours. If the message is to be sent
every 24 hours, leave the factory default entry of '0'. If other test report times are needed, enter '1' for 12 hours, '2' for
8 hours or '3' for 6 hours.
Secondary Central Station Phone Number (26-41)
Addresses (26-41) are factory set to 'F' (
26_F
to
41_F
). Programming this feature is typically done as follows: If the
phone number to be entered is 484-7161, press
4
. The display will read
26_4
. Press
[ENTER/STORE]
to save the
entry to memory and increment to the next address
27_F
.
Enter the remaining numbers in their respective addresses as shown below:
Valid entries for both the primary and secondary phone numbers are 0 - F with the numeric digits as dialed numbers
and the alpha-characters representing the following functions:
A = * on a Touchtone phone keypad
B = # on a Touchtone phone keypad
C = look for secondary dial tone for up to two seconds (then dial anyway)
D = 3-second pause
E = 5-second pause
F = end of phone number (Note: F must be entered)
4
8
4
7
1
6
1
F
F
F
F
F
F
F
F
F
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41
Phone Number
Addresses