![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870054.webp)
Farmer 400
Fav 700
Fav 900
T
ractor / General system
V
ario T
ractors - Failure Codes
B
Faults
12/1999
0000
000001
B
b
36/47
Capitel
Docu-No.
Index
Date
Version
Page
Vario Tractors - Failure Codes
9.1.56
Spool valve fault
Magnet output stage
fault within spool valve
Valve moves into neutral
position
FRONT POWER LIFT
9.1.57
Spool valve fault
Internal position sensor
fault
Valve moves into neutral
position
FRONT POWER LIFT
9.1.58
Spool valve fault
Main piston cannot
return into neutral
position because of oil
contamination
FRONT POWER LIFT
9.1.59
Spool valve fault
Main piston cannot
return into neutral
position when switched
on because of oil
contamination
FRONT POWER LIFT
9.1.A0 A002
ECU, enhanced control EEPROM fault while
storing
Set values (enhanced
controls) are not stored
9.1.A1 A002
ECU, enhanced control EEPROM fault while
loading
Set values (enhanced
controls) cannot be read
9.1.B0 B040
Position sensor
Not calibrated
No position control
available
"Spool valves 2" circuit
diagram
FRONT POWER LIFT
calibration code "9002"
9.1.B1 B040
Position sensor
Signal line fault
No position control
available
Circuit diagram "Spool
Valves 2"
FRONT POWER LIFT
8.5 V supply Fault
Sensor out of position
Sensor fault
9.1.B2 A004
Depth control setpoint
potentiometer
Not calibrated
Setpoint cannot be set
FRONT POWER LIFT
calibration code "9001"
9.1.B3 A004
Depth control setpoint
potentiometer
Switch / A004 signal
fault
Setpoint cannot be set
FRONT POWER LIFT
9.1.C0 A004
Control console
Not available or bus not
connected
Fault
code
Id code
Brief description
Description
Consequences
Link
FENDIAS / Note