![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870458.webp)
Fav 900
Transmission / Live PTO
Installation and removal of live PTO gearbox
G
Repair
28.08.2001
1220
000003
G
a
13/17
Capitel
Docu-No.
Index
Date
Version
Page
Installation and removal of live PTO gearbox
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
In event of discrepancies
Adjust hexagon nut (213) correspondingly until
play of 0.1-0.2 mm is reached and then lock.
PMTAB_Picture
Remove G clamp.
Switching mechanism engages in "Neutral".
It must be possible to rotate spur gears for 750 or
540 and 1000 positions freely.
Free travel in switching mechanism must be
equally large upwards and downwards.
In event of discrepancies repeat setting procedure
for switching mechanism.
PMTAB_Picture
Fit locating ring (102).
Slide inner race of taper roller bearing (101) onto
shaft (120) as far as stop.
PMTAB_Picture
Locate spur gear (25).
Insert new O-ring into groove in shaft (35) and
grease.
Check brake disc (20) for damage.
If required, fit new brake disc (20).
For further details on fitting clutch please refer
to:
Chapter 1220 Reg. G - Installation and removal
of live PTO clutch