![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870799.webp)
Farmer 400
Fav 700
Fav 900
Power lift / Electrohydraulic control EPC
Operation and function of electronic slip control
A
General
Fav 900 chassis number 23/3001 and up
11.04.2001
8610
000006
A
a
3/5
Capitel
Docu-No.
Index
Date
Version
Page
Operation and function of electronic slip control
PM-Picturemodule
Text-module
Calibrating radar sensor A011
Accurately measure and mark out gauge length of between 30 m and 100 m (e.g. 100).
Position tractor front wheel precisely on start mark.
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
A
= Display: current slip (%)
B
= Speed display in km/h
based on theoretical speed measurement
from transmission speed, signal from bevel
pinion speed sensor B015
based on actual speed measurement from
signals from radar sensor A011,
pictogram (C) is displayed.
Above 15 km/h the system automatically
switches to theoretical speed
measurement. Slip display (A) and
pictogram (C) disappear.
D
= Display for speed range (I , II)
H, G, F = Preset display for engine, front PTO,
rear PTO
E
= Speed display (rpm) for engine, front
PTO, rear PTO
PMTAB_Picture
Press F5 and this submenu is displayed.
PMTAB_Picture
A
= Using rotary control (P) set display to
measured distance (e.g. 100 m).
Press F1.