![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870819.webp)
Farmer 400
Fav 700
Fav 900
Power lift / Electrohydraulic control EPC
Rear power lift troubleshooting flowchart
B
Faults
Fav 900 chassis number 23/3001 and up
03.05.2001
8610
000005
B
a
2/3
Capitel
Docu-No.
Index
Date
Version
Page
Rear power lift troubleshooting flowchart
Draft-sensing pin
B031/B032
(Chapter 9000 Reg. E)
I
I
Electrical reading OK
No
+supply and earth from
EPC ECU A005 (if draft-
sensing pins B031/B032
are overloaded, A005
shuts down)
Yes
I
Break in cable
I
Check EPC ECU A005.
(Chapter 9000 Reg.E and
Chapter 8610 Reg.E)
Depth control signal
(pin 8) defective, (signal
comes from control con-
sole A004)
(Chapter 9000 Reg.E and
Chapter 8610 Reg.E)
Rapid lift control on con-
trol console A004 defec-
tive. (Signal comes from
control console A004 and
runs via K-bus to
EPC ECU A005.)
Note: Arrows in terminal
A008 are shown when ra-
pid lift control switch si-
gnal is correct.
I
I
Electrical reading OK
No
I
I
Check K-bus
(Chapter 9000 Reg. E)