![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870713.webp)
Fav 900
Engine / Injection Pump
Fuel Injection Pump VP 44 - Mounting - Dismounting
G
Repair
Fav 900 Chassis number 23/3001 and up
01/2000
2710
000002
G
b
3/10
Capitel
Docu-No.
Index
Date
Version
Page
Fuel Injection Pump VP 44 - Mounting - Dismounting
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Put first cylinder into TDP position (Arrow) using
the actuation tool.
PMTAB_Picture
Important:
1. Cylinder will be in TDP Position, if the flat
section of the control shaft appears in the TDP
hole
If the flat section does not appear on the
control shaft, rotate the engine for another
360
°
into TDP positon.
Valves of cylinder 6 (Flywheel side ) are in
central positon.
PMTAB_Picture
Turn back the crank shaft by at least 20
°
before
TDP and put dial gauge with adaptor
(X 899.980.245.000) into the hole of TDP.
Note:
Use dial gauge with ball tip R=1mm (0.039").
PMTAB_Picture
Set Dial gauge onto "0".