![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870353.webp)
Fav 900
Transmission / Vario transmission unit
Fitting continuously variable transmission
G
Repair
Fav 900 chassis number 23/3001 and up
16.05.2001
1080
000007
G
a
1/9
Capitel
Docu-No.
Index
Date
Version
Page
Fitting continuously variable transmission
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Attach transmission unit to hoist, taking
appropriate safety precautions.
Shift range control I - II (arrowed) to "Neutral"(in
mid-position).
PMTAB_Picture
Clean seal surfaces on transmission housing to
remove oil and seal residues.
Move selector finger (arrowed) of range control
I - II in transmission housing to "Neutral" (in
mid-position).
PMTAB_Picture
Where removed:
Clamp circlip and washer to collar of pinion shaft.
Slide coupling sleeve onto pinion shaft in direction
of arrow until stop is reached.
Locate flange on connection shaft (PTO drive)
and insert connection shaft.
PMTAB_Picture
Insert ML transmission into transmission housing.
Ensure clearance of all components. Insert two
shafts into bores of transmission housing and
transmission unit.
Note:
Insert short shaft, see photo.