![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870410.webp)
Fav 900
Transmission / Front PTO
Installation and removal of front PTO clutch
G
Repair
Fav 900 chassis number 23/3001 and up
13.08.2001
1200
000005
G
a
14/19
Capitel
Docu-No.
Index
Date
Version
Page
Installation and removal of front PTO clutch
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PM-Picturemodule
PMTAB_Picture
Pinch sealing ring and ..
PMTAB_Picture
... insert sealing ring into groove in cylinder liner
(42) with sealing edge facing oil pressure
chamber and grease.
Note:
Chapter 1200 Reg. C - Technical drawing of
front PTO clutch
PMTAB_Picture
Locate cylinder liner (42).
Note:
Note position of parallel pin (40) and
dowel pin (43).
PMTAB_Picture
Pre-assembling shaft (45)
Check deep-groove ball bearing (16) and, if
necessary, replace with new bearing.
Clip in circlip (15), slide deep-groove ball bearing
(16) on as far as stop and secure with circlip (15).