![background image](http://html1.mh-extra.com/html/fendt/favorit-900/favorit-900_workshop-manual_4001870322.webp)
Fav 900
Transmission / Brake system
Technical drawing of brake cylinder
C
Documents and Diagrams
15.10.2001
1070
000003
C
a
3/3
Capitel
Docu-No.
Index
Date
Version
Page
Technical drawing of brake cylinder
PM-Picturemodule
Adjusting brake cylinder
PMTAB_Picture
●
Remove upper part of brake cylinder.
●
Unscrew lock nut on M10 setscrew.
●
Tighten setscrew using torque gauge
X899.980.151 until tightening torque of
4.0 to 5.0 Nm (rear wheel locks) is reached.
If new brake package has been fitted
●
Tighten setscrew to 15 Nm (brake package
moves into contact).
●
Loosen setscrew.
●
Tighten setscrew to 4.0 to 5.0 Nm (rear wheel
locks).
Fav 900 /21/ ...
Unscrew setscrew by 1 2/3 turns (rear wheel
can be turned) and then lock.
Fav 900 chassis number 23/3001 and up
Unscrew setscrew by 2/turns (rear wheel can
be turned) and then lock.
●
Tighten hexagon nut to 40 +5 Nm .
Note:
When locking, only tighten hexagon nut.
Outer hexagon socket (or inner hexagon
socket) is only for holding, not for locking.
Chapter 1070 Reg. C - Technical drawing of
brake cylinder
●
Fit upper part of brake cylinder.