manualshive.com logo in svg

FEI Scios 2, Руководство пользователя

FEI Scios 2 - мощный электронный микроскоп с высоким разрешением. На нашем сайте вы можете скачать бесплатное руководство пользователя для Scios 2. Инструкция доступна для загрузки с manualshive.com. Узнайте как использовать все возможности этого удивительного прибора для исследования микро мира.

Поделиться
Скачать
background image

Software Control: 

Microscope Control Software

C O N F I D E N T I A L  – FEI Limited Rights Data  

3-27

Imaging Area 

The Microscope Control software (UI) uses 4 independent displays for imaging samples. Each display can contain 
imaging from any detector (including External and CCD), paused imaging or images loaded from a file. 
Additionally, display 3 can show a mix of imaging from displays 1 and 2, and display 4 can show a mix of imaging 
from display 1, 2 and 3. 

There are shown either 4 displays at the same time – 

Quad Image

 mode or one display over the UI imaging area – 

Single Image

 mode. 

Each display consists of its imaging area, adjustable Databar containing the imaging parameters, selectable overlay 
(user-defined coloring, annotations, measurement) and some status icons (Pause, Sample Navigation, etc.).

At any time, just one display is selected (has focus), and all functions (related to it – Pause, Sample Navigation, 
image processing) applies only to imaging in this display. The selected display is marked by the highlighted (blue) 
Databar and optionally also by the blue frame (see 

Preferences / General

).

Depending on the display content and the status, some mouse functions are available over its area:

•

Electron imaging

 (incl. External and Mix): focus, astigmatism correction, Beam Shift, magnification change 

(coarse, fine), zoom (in / out), Contrast & Brightness, lens alignment, Scan / Compucentric Rotation, XY-move 
(get or track mode) 

•

Ion imaging

 (incl. External and Mix): focus, astigmatism correction, Beam Shift, magnification change (coarse, 

fine), zoom (in / out), Contrast & Brightness, Scan / Compucentric Rotation, XY-move (get or track mode) 

•

Optical imaging

: 7 mm Marker placement, Compucentric Rotation, Z-move (track), Tilt 

The optical imaging is automatically activated (if it is paused), when the venting procedure 

starts. When it is paused and any stage movement takes place, the pause icon turns red and a 
list of changed axes is shown. 

Note 

Due to hardware limitations, some detectors cannot be used simultaneously. They can still be selected 
for different displays at the same time, but if one of them is started, the other imaging with incompatible 
detectors are automatically paused. 

Image Databar 

Optional instrument, imaging and labelling information are shown at the base of all displays. The configuration and 
available items differ for the beam selected (Electron / Ion / Optical / Nav-Cam) for the selected display. 

FIGURE 3-13 

The Databar Examples  

Note 

The Databar information is always related to the actual imaging. If the imaging is paused or an image is loaded from a file, 
they can differ from the actual system conditions. 

Clicking on some of the image databar fields induces an active menu related to it with appropriate 

choices. 

Clicking on the label field induces the label editing menu. 

Double-clicking on the micron bar induces the Image properties window – multiple parameters at 
which an image was captured. Same functionality is caused by pressing the Shift + F1 keys. 

To set information included in the databar right-click on any display databar and click on & drag 
desired 

Available Item

 to the 

Visible Items

 field. Items can be placed in any order (by dragging the 

item up / down within the list) and expand or contract automatically to fit the display width as 
long as there is enough room, which influences all displays with the same beam. 

Selected electron display

Not selected electron display

Not selected optical display

Selected Patterning display

Not selected Patterning display

Selected Nav-Cam display 

(option)

Содержание Scios 2

































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Scios 2

Motic SMZ168 Series Instruction Manual preview
SMZ168 Series
Бренд: Motic Страницы: 22
Richter Optica UX1B Instructions Manual preview
UX1B
Бренд: Richter Optica Страницы: 10
Viavi FVAm Series User Manual preview
FVAm Series
Бренд: Viavi Страницы: 57
3B SCIENTIFIC PHYSICS 400 1003274 Instruction Manual preview
400 1003274
Бренд: 3B SCIENTIFIC PHYSICS Страницы: 24
BEL BIO2 User Manual preview
BIO2
Бренд: BEL Страницы: 16
AmScope AFDM1080 Manual preview
AFDM1080
Бренд: AmScope Страницы: 19
Olympus CHA-P Instruction Manual preview
CHA-P
Бренд: Olympus Страницы: 20
Olympus IX70 Operation Manual preview
IX70
Бренд: Olympus Страницы: 31
Olympus VMF Repair Manual preview
VMF
Бренд: Olympus Страницы: 52
PI PIFOC QuickLock P-726.04 Technical Note preview
PIFOC QuickLock P-726.04
Бренд: PI Страницы: 4
PI M-545 Series User Manual preview
M-545 Series
Бренд: PI Страницы: 16
GeoSafari Pocket Scope User Manual preview
Pocket Scope
Бренд: GeoSafari Страницы: 2
Cole Parmer 78904-66 Installation And Operating Instructions Manual preview
78904-66
Бренд: Cole Parmer Страницы: 12
Cole Parmer 78904-48 Installation And Operating Instructions Manual preview
78904-48
Бренд: Cole Parmer Страницы: 16
Cole Parmer 78904-00 Installation And Operating Instructions Manual preview
78904-00
Бренд: Cole Parmer Страницы: 16
Cole Parmer 78903-90 Installation And Operating Instructions Manual preview
78903-90
Бренд: Cole Parmer Страницы: 16
Cole Parmer 78904-02 Installation And Operating Instructions Manual preview
78904-02
Бренд: Cole Parmer Страницы: 20
Cole Parmer 78904-16 Installation And Operating Instructions Manual preview
78904-16
Бренд: Cole Parmer Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды