Extreme Networks ExtremeWare 7.3.0, Справочник по командам

Страница: 2178 / 2254

2178 ExtremeWare Software 7.3.0 Command Reference Guide
Troubleshooting Commands
configure debug-trace pim-cache
configure debug-trace pim-cache <debug level>
Description
This command records debug information to the syslog.
Syntax Description
Default
The default level is 0.
Usage Guidelines
The
debug level
range is 0 to 5. Higher levels record more verbose messages. Higher levels also record
the messages recorded at lower levels.
This command traces the detailed process of adding, deleting, and modifying a multicast cache. The IP
multicast cache is a hardware forwarding entry identified by a ptag index number. The following
command displays the cache entries:
show ipmc cache [detail] <IP multicast group>
The trace is based on the ingress VLAN of a cache. Use this tool if the egress list of a cache is incorrect,
if there are missing cache entries, or if any multicast stream jitters.
Example
The following command sets the reporting level for PIM cache errors to 3:
configure debug-trace pim-cache 3
Following is the log output at this level:
<INFO:SYST> msm-a-console admin: configure debug-trace pim-cache 3
<DBUG:PIM> PIM: 142.168.100.100/236.58.16.16: pimSendRegStop: dst 15.1.6.3
<DBUG:PIM> PIM: ProcRegister: sptree flow exists
<DBUG:PIM> PIM: 142.168.100.100/236.58.16.16: entry timer starting for 210
<DBUG:PIM> PIM: 142.168.100.100/236.58.16.16: fwd: extending entry's life
<DBUG:PIM> PIM: ProcRegister: NoBorder: rp:15.1.4.1 src:15.1.6.3
<DBUG:PIM> PIM: ProcRegister: 142.168.100.100/236.58.16.16
<DBUG:PIM> PIM: ProcRegister: null bit set
<DBUG:PIM> PIM: 142.168.100.100/235.49.1.6: pimSendRegStop: dst 15.1.6.3
debug level Specifies a debug level:
0 — Records error messages.
1 — Records warnings.
2 — Records verbose warnings.
3 — Displays a dump of each packet.
4 — No additional information recorded.
5 — No additional information recorded.