Extreme Networks ExtremeWare 7.3.0, Справочник по командам

Страница: 1780 / 2254

1780 ExtremeWare Software 7.3.0 Command Reference Guide
MPLS Commands
•
route-map <route_map>
—The specified route map is used to permit or deny the origination of
unsolicited label mappings for all routes of the specified type.
The only supported route map match operation keyword is
nlri-list
. If selected, the
access_profile
parameter of the
nlri-list
keyword is compared to the FEC that is associated
with each route.
NOTE
For more information on route maps, see the ExtremeWare Software Users Guide.
RIP routes are advertised with the Implicit NULL label and direct routes are advertised with an MPLS
label, unless PHP is enabled.
Advertising labels for a large number of routes may increase the required number of labels that must be
allocated by LSRs. Take care to ensure that the number of labels advertised by LERs does not
overwhelm the label capacity of the LSRs.
Example
The following command configures a filter to be used by LDP when originating unsolicited label
mapping advertisements for RIP routes:
configure mpls ldp advertise rip all
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.