Extreme Networks ExtremeWare 7.3.0, Справочник по командам

Страница: 162 / 2254

162 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
disable snmp access
disable snmp access {snmp-v1v2c}
Description
Selectively disables SNMP on the switch.
Syntax Description
Default
Enabled.
Usage Guidelines
Disabling SNMP access does not affect the SNMP configuration (for example, community strings).
However, if you disable SNMP access, you will be unable to access the switch using SNMP.
To allow access, use the following command:
enable snmp access
By using the enable and disable commands you can enable all SNMP access, no SNMP access, or only
SNMPv3 access. You cannot enable only SNMPv1/v2c access. To enable SNMPv3 only access on the
switch, use the following commands:
enable snmp access
disable snmp access snmp-v1v2c
Example
The following command disables all SNMP access on the switch:
disable snmp access
History
The
snmp-v1v2c
keyword was added in ExtremeWare 7.1.0
This command was first available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
snmp-v1v2c Disables SNMPv1/v2c access only; does not affect SNMPv3 access.