Extreme Networks ExtremeWare 7.3.0, Справочник по командам

Страница: 1839 / 2254

show mpls ldp
ExtremeWare Software 7.3.0 Command Reference Guide 1839
show mpls ldp
show mpls ldp {<ipaddress>} {detail}
Description
Displays MPLS LDP session information for one or all LSP sessions.
Syntax Description
Default
N/A.
Usage Guidelines
Omitting the ipaddress parameter displays LDP session information for all LDP sessions.
This command displays information about the status of LDP peers. Summary information is displayed
for all known LDP peers and LDP peer sessions. If you specify the
<ipaddress>
of the LDP peer,
information for a single LDP peer is displayed. To display additional information in the comprehensive
detailed format, use the
detail
keyword.
Displayed summary information includes:
• Peer type (targeted or not targeted)
• Peer status
• Peer sessions
• Peer session state
If you specify the
detail
keyword, the following additional information is displayed:
• LDP error counts
• LDP status timers
• Maximum PDU length
Example
The following command displays MPLS LDP session information for the LDP entity 10.1.1.1:
show mpls ldp 10.1.1.1
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
ipaddress Specifies an IP address.
detail Specifies to display the information in detailed format.