Extreme Networks ExtremeWare 7.3.0, Справочник по командам

Страница: 2019 / 2254

configure wireless ports interface ap-scan send-probe
ExtremeWare Software 7.3.0 Command Reference Guide 2019
configure wireless ports interface ap-scan send-probe
configure wireless ports [<portlist> | all] interface [1 | 2] ap-scan
send-probe [on | off]
Description
Use this command to enable the sending of probes for active scanning.
Syntax Description
Default
Off.
Usage Guidelines
Use this command to enable the sending of probes. Setting
send-probe
to
on
specifies active scanning.
Setting
send-probe
to
off
specifies passive scanning.
Example
The following example enables the port range 1:15-1:24 using interface 1 to enable probes.
configure wireless ports 1:15-1:24 interface 1 ap-scan send-probe on
History
This command was first available in ExtremeWare 6.2a and added to the “ i ” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all ports.
interface Specifies an interface: 1 or 2.
on Specifies to send probes (active scanning).
off Specifies not to send probes (passive scanning).