Extreme Networks ExtremeWare 7.3.0, Справочник по командам

Страница: 198 / 2254

198 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
show session
show session
Description
Displays the currently active Telnet, console, and web sessions communicating with the switch.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
The
show session
command displays the username and IP address of the incoming Telnet session,
whether a console session is currently active, and the login time.
The following table displays the
show session
command field definitions.
Example
The following command displays the active sessions on the switch:
show session
Following is the output from this command:
# Login Time User Type Auth CLI Auth Location
==============================================================================
0 Tue Feb 19 18:08:42 2002 admin console local disabled serial
5 Thu Feb 21 19:09:48 2002 admin http local disabled 10.0.4.76
* 1028 Thu Feb 21 18:56:40 2002 admin telnet local disabled 10.0.4.19
Table 8: Show Command Field Definitions
Field Definition
# Indicates session number.
Login Time Indicates login time of session.
User Indicates the user logged in for each session.
Type Indicates the type of session.
Auth Indicates how the user is logged in.
CLI Auth Indicates the type of authentication (RADIUS and TACAS) if enabled.
Location Indicates the location (IP address) from which the user logged in.