Extreme Networks ExtremeWare 7.3.0, Справочник по командам

Страница: 2002 / 2254

2002 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
configure rf-profile short-retry
configure rf-profile <name> short-retry <value>
Description
Specifies the number of transmission attempts of frames smaller than the request-to-send (RTS)
threshold.
Syntax Description
Default
4.
Usage Guidelines
Use this command to set the number of transmission attempts for frames smaller than the RTS
threshold setting in the same RF profile. The
short-retry
value specifies the number of attempts
before a frame will be discarded when a station attempts to retransmit a frame. Short retry applies to
frames shorter than the RTS threshold and it is set to 4 by default. A frame requiring RTS/CTS clearing
is retransmitted four times before being discarded.
To specify a the number of transmission attempts of a frame larger than the RTS threshold, use the
following command:
configure rf-profile <name> long-retry <value>
Examples
The following command sets the transmission attempts to 3:
configure rf-profile rfprof1 short-retry 3
History
This command was first available in ExtremeWare 6.2a and added to the “ i ” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
name Specifies the name of the RF profile.
value Specifies the number of transmission attempts of a frame. Valid values are
from 1 to 255.