Extreme Networks ExtremeWare 7.3.0, Справочник по командам

Страница: 2103 / 2254

show wireless ports interface status
ExtremeWare Software 7.3.0 Command Reference Guide 2103
show wireless ports interface status
show wireless ports [<portlist> | all] interface [1 |2] status
Description
Displays the current state of the selected port and interface.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to examine RF profiles on a per wireless port basis. This command allows you to
view the log of a specific port or ports, filtering out the switch log.
Examples
The following example displays the status for wireless ports 3 on interface 1:
show wireless ports 3 interface 1 status
The output of the command is similar to:
Intf St. Tx Rate Power Ch ESS Max Cl. Last State Change
-------------------------------------------------------------------------------
3:1 EN 54 FULL 52 fz-wpa-psk-aes 100 Mon Jul 26 17:15:11 2004
History
This command was first available in ExtremeWare 6.2a and added to the “ i ” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.