Extreme Networks ExtremeWare 7.3.0, Справочник по командам

Страница: 2039 / 2254

create rf-profile mode
ExtremeWare Software 7.3.0 Command Reference Guide 2039
create rf-profile mode
create rf-profile <profile_name> mode [ A | B | B_G | G ]
Description
Creates a new RF profile by defining the interface mode.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to create a new profile without copying from an existing profile.
Example
The following command creates a new RF profile called rfprof_alpha using interface mode G:
create rf-profile rfprof_alpha mode g
The following command can be used to validate that you created the new RF profile as entered:
show rf-profile rfprof_alpha
or
show rf-profile
The latter command shows all RF profiles.
History
This command was first available in ExtremeWare 6.2a and added to the “ i ” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
profile_name Specifies the name of the new RF profile.
A Specifies the 802.11a interface mode.
B Specifies the 802.11b interface mode.
B_G Specifies the 802.11b or 802.11g interface modes.
G Specifies the 802.11g interface mode.