Extreme Networks ExtremeWare 7.3.0, Справочник по командам

Страница: 2008 / 2254

2008 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
configure wireless ports detected-station-timeout
configure wireless ports [<portlist> | all] detected-station-timeout
<seconds>
Description
Sets the client current state age time-out value.
Syntax Description
Default
600 seconds.
Usage Guidelines
Client aging allows you to configure an aging timer for wireless stations. When a specified period of
time elapses with no data traffic from the client to the Altitude 300, the client is de-authenticated and
removed from all client station tables for that interface. After a client is aged out, it can reassociate and
re-authenticate to the Altitude 300. Age-out information can be collected from such events as client
station failures, station idle-timeouts, or a client abruptly leaving the wireless network without notifying
the associated Altitude 300. The timeout value is configured for each port and affects both interfaces 1
and 2.
Example
The following command configures ports 13-24 to time-out the client current state table at 120 seconds.
configure wireless ports 13-24 detected-station-timeout 120
History
This command was first available in ExtremeWare 6.2a and added to the “ i ” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all ports.
seconds Specifies the amount of time in seconds when the client current state table
times out. Valid values are between 60 to 3600.