Extreme Networks ExtremeWare 7.3.0, Справочник по командам

Страница: 115 / 2254

configure snmp add trapreceiver
ExtremeWare Software 7.3.0 Command Reference Guide 115
To view the SNMP trap receivers configured on the switch, use the
show management
command. The
show management
command displays information about the switch including the destination and
community of the SNMP trap receivers configured on the switch.
To restore defaults to all SNMP-related entries, including the SNMP parameters modified using the
configure snmp add trapreceiver
command, use the
unconfigure management
command.
For version 7.1 and higher:
• Only the trap groups specified will be sent to the receiver.
ExtremeWare 7.1 introduced support for SNMPv3, and the concept of trap groups was added to
allow SNMPv1/v2c users to access a simplified version of the capabilities of SNMPv3. The trap
groups are pre-defined and cannot be modified. See chapter 3, “Managing the Switch”, in the
ExtremeWare Software User Guide for more detail about trap groups.
For version 6.0 and higher:
• A maximum of sixteen trap receivers can be configured for each switch.
For version 4.x:
• A maximum of six trap receivers can be configured for each switch.
Example
The following command adds the IP address 10.101.0.100 as a trap receiver with community string
purple :
configure snmp add trapreceiver 10.101.0.100 community purple
The following command adds the IP address 10.101.0.105 as a trap receiver with community string
green, using port 3003:
configure snmp add trapreceiver 10.101.0.105 port 3003 community green
The following command adds the IP address 10.101.0.105 as a trap receiver with community string blue,
and IP address 10.101.0.25 as the source:
configure snmp add trapreceiver 10.101.0.105 community blue from 10.101.0.25
The following command adds port 9990 at the IP address 10.203.0.22 as a trap receiver with the
community string
public , and the receiver should be sent standard traps for the trap groups for BGP and
Extreme Networks:
link-up-down-traps linkDown
linkUp
1.3.6.1.6.3.1.1.5.3
1.3.6.1.6.3.1.1.5.4
rmon-traps risingAlarm
fallingAlarm
rmon-traps, 1.3.6.1.2.1.16.0
security-traps extremeMacLimitExceeded
extremeUnauthorizedPortForMacDetected
extremeMacDetectedOnLockedPort
extremeNetloginUserLogin
extremeNetloginUserLogout
extremeNetloginAuthFailure
1.3.6.1.4.1.1916.4.3.0.1
1.3.6.1.4.1.1916.4.3.0.2
1.3.6.1.4.1.1916.4.3.0.3
1.3.6.1.4.1.1916.4.3.0.4
1.3.6.1.4.1.1916.4.3.0.5
1.3.6.1.4.1.1916.4.3.0.6
Table 7: SNMP Trap Groups (Continued)
Trap Group Notifications MIB Subtree