Extreme Networks ExtremeWare 7.3.0, Справочник по командам

Страница: 820 / 2254

820 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
configure security-profile ssid-in-beacon
configure security-profile <name> ssid-in-beacon {on | off}
Description
Establishes whether the service set identifier (SSID) is advertised in the beacon frame.
Syntax Description
Default
On.
Usage Guidelines
The beacon turns on whether the SSID is published in the beacon or not. If you set this command to off,
then the beacon does not contain the SSID and the client must know the SSID before it can associate.
Sniffing on the beacon shows an empty SSID.
Configuration changes take effect immediately and are propagated to all ports sharing the named
profile. If the command fails, none of the changes is propagated to any of the ports.
Examples
The following command configures the security profile secure1 not to publish the SSID in the beacon:
configure security-profile secure1 ssid-in-beacon off
History
This command was first available in ExtremeWare 6.2a and added to the “ i ” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
name Specifies the names of the security profile.
on Specifies that the beacon contains the SSID.
off Specifies that the beacon does not contain the SSID.