Epson PP-100N - Discproducer - DVD Duplicator x2 Скачать руководство пользователя страница 155

Страница: 155 / 174

155

Troubleshooting

Internal drive

error (DR1/2)

Turn off the power, and then turn it on again.

If the same error

message still appears, repair is required. Please contact

Customer Support.

Internal printer

error

Turn off the power, and then turn it on again.

If the same error

message still appears, repair is required. Please contact

Customer Support.

Invalid

state error

Turn off the power, and then turn it on again.

If the same error

message still appears, repair is required. Please contact

Customer Support.

No disc

ST1,ST2

Load discs into the input stacker (Stacker 1 or Stacker 2).

No ink cartridge

(C,LC,LM,M,Y,K)

The ink cartridge of the displayed color is not installed, or is

not installed correctly.

Correctly install the cartridge of the displayed color.

(See “Changing the ink cartridge” on page 131 in this

guide.)

No stacker

ST1,ST2,ST3

Load the displayed stacker, and close the disc cover.

(See

“Handling stackers” on page 21 in this guide.)

Non-standard ink

Continue?

To use the ink cartridge, press the

button (Yes). To

change to a Epson brand ink cartridge,

press the CANCEL

button (No), and change the ink cartridge.

Use of non-Epson brand ink cartridges is not recommended.

•

Use of non-Epson brand ink cartridges can result in

problems that will not be covered by the warranty.

•

Epson cannot guarantee the quality and reliability of non-

Epson brand products. Repairs for any damage or

breakdown of this product due to the use of non-Epson

brand products will not be free of charge even if the

warranty period is still valid.

•

This product performs color adjustment based on use of

Epson brand ink cartridges. Use of non-Epson brand ink

products can adversely affect the printing quality and

prevent the product from realizing its maximum

performance.

•

The ink level for non-Epson brand ink products is not

displayed in the printer driver or other indicators.

See “Changing the ink cartridge” on page 131 in this guide

for the ink cartridge changing procedure.

Error Message

Remedy

Notification

Sound

Содержание PP-100N - Discproducer - DVD Duplicator x2















































































































































































Результаты поиска

Содержание PP-100N - Discproducer - DVD Duplicator x2

Отзывы:

Похожие инструкции для PP-100N - Discproducer - DVD Duplicator x2

Бренды по названию

Популярные бренды

Epson PP-100N - Discproducer - DVD Duplicator x2, Руководство пользователя

Результаты поиска

Содержание PP-100N - Discproducer - DVD Duplicator x2

Отзывы:

Похожие инструкции для PP-100N - Discproducer - DVD Duplicator x2

Бренды по названию

Популярные бренды