Epson PP-100N - Discproducer - DVD Duplicator x2 Скачать руководство пользователя страница 154

Страница: 154 / 174

154

Disc release

error

The arm cannot release the disc.

Do not remove the disc by hand. This could damage the

arm. Turn off the power of the product, and then turn it on

again. During the initialization operation of the product, the

arm releases the disc.

If the same error message still

appears, repair is required. Please contact Customer

Support.

Discs ejected

from ST2?

Perform the procedure below.

1. Remove the published discs from Stacker 2.

2. Refill the discs if necessary.

3. Press the

button.

Note: In Batch Mode, if Stacker 2 is removed during

publishing progress, it is always recognized as the input

stacker when loaded again.

Drive tray

open/close error

-When the drive tray does not come out-

Turn off the power, and then turn it on again. If the drive trays

still does not come out, see “Drive tray does not come out”

PP-100N Administrator’s Guide

If the same error message

appears again, repair is required. Please contact Epson

Information Center.

-When the drive tray does not close-

Remove any remaining discs, turn off the power, and then

turn on the power again.

If the same error message still appears, repair is required.

Please contact Epson Information Center.

Fan control

error

Turn off the power, and then turn it on again.

If the same error

message still appears, repair is required. Please contact

Customer Support.

Ink cartridge

cover open

Close the ink cartridge cover.

This product is currently operating.

Close the ink cartridge cover.

Ink problem

(C,LC,LM,M,Y,K)

An invalid ink cartridge is installed.

Replace the cartridge of the displayed color.

(See

“Changing the ink cartridge” on page 131 in this guide.)

Internal

autoloader error

Perform the procedure below.

1. Turn off the power.

2. Open the disc cover, and check if any dust or foreign

objects are inside.

3. Turn on the power.

If the same error message still appears, repair is required.

Please contact Customer Support.

Error Message

Remedy

Notification

Sound

Содержание PP-100N - Discproducer - DVD Duplicator x2















































































































































































Результаты поиска

Содержание PP-100N - Discproducer - DVD Duplicator x2

Отзывы:

Похожие инструкции для PP-100N - Discproducer - DVD Duplicator x2

Бренды по названию

Популярные бренды

Epson PP-100N - Discproducer - DVD Duplicator x2, Руководство пользователя

Результаты поиска

Содержание PP-100N - Discproducer - DVD Duplicator x2

Отзывы:

Похожие инструкции для PP-100N - Discproducer - DVD Duplicator x2

Бренды по названию

Популярные бренды